Brass Round Bars


 Brass Round Bars

We are leaders in our field and are involved in manufacturing an extensive range of high quality Semi-finished Brass Rods Grade 1. We offer these products in different sizes and thickness, which can be further customized as per the precise needs given by our esteemed clients. With some great features like Easy to apply, Corrosion resistance, Light weight, and more, these rods are manufactured using quality assured stainless steel and with the help of innovative technology in compliance with international standards

IS 319/320 Brass Free Cutting Grade 1 / 2 is the standard grade for Free Machining Brass. it is the widely used owing to its suitability for high speed machining operations and also for manufacture of complex parts. The ease of brazing/soldering, high corrosion resistance combined with its good strength and a machinability rating of 100% makes it an ideal choice of application in wide range of brass components throughout the industry.

Copper, Brass and Bronze, otherwise known as the “Red Metals”, may look the same initially but are actually quite different.

Brass Bars

Product Features:

  • Corrosion resistant
  • Accurate dimensions
  • Can sustain high pressure & temperature load
  • Rust proof finish
  • Ensure excellent stress distribution


StandardsIS 319 / IS 320
Range3mm to 152mm Dia
Length100 mm to 6000 mm
FormRound, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Material & Grade :

Brass :
Grade 1 / 2 , HT 1 / 2

Chemical Composition :

Chemical RequirementsGrade I
Cu56 to 58 %
Pb2 to 3.50 %
Fe0.3% Max
Other Impurities excel Fe.0.75% Max

Mechanical Properties :

Yield Stress150 MPa Min.
Tensile Strength380 MPa Min.
Hardness Brinell90 to 160 HB
Elongation18 Min.


Brass is mainly an alloy that consists of copper with zinc added. Brasses can have varying amounts of zinc or other elements added. These varying mixtures produce a wide range of properties and variation in color. Increased amounts of zinc provide the material with improved strength and ductility. Brass can range in color from red to yellow depending on the amount of zinc added to the alloy.

  • If the zinc content of the brass ranges from 32% to 39%, it will have increased hot-working abilities but the cold-working will be limited.
  • If the brass contains over 39% zinc (example – Muntz Metal), it will have a higher strength and lower ductility (at room temperature).

Brass Applications

Brass is commonly used for decorative purposes primarily because of its resemblance to gold. It is also a commonly used to make musical instruments due to its high workability and durability.

Other Brass Alloys

Tin Brass
This is an alloy that contains copper, zinc and tin. This alloy group would include admiralty brass, naval brass and free machining brass. The tin has been added to inhibit dezincification (the leaching of zinc from brass alloys) in many environments. This group has low sensitivity to dezincification, moderate strength, high atmospheric and aqueous corrosion resistance and excellent electrical conductivity. They possess good hot forgeability and good cold formability. These alloys are typically used to make fasteners, marine hardware, screw machine parts, pump shafts and corrosion-resistant mechanical products.


Bronze is an alloy that consists primarily of copper with the addition of other ingredients. In most cases the ingredient added is typically tin, but arsenic, phosphorus, aluminum, manganese, and silicon can also be used to produce different properties in the material. All of these ingredients produce an alloy much harder than copper alone.

Bronze is characterized by its dull-gold color. You can also tell the difference between bronze and brass because bronze will have faint rings on its surface.

Copper Nickel Grade

90-10 – 90/10 cupronickel is a 90% copper, 10% nickel alloy that also contains small but important additions of iron and manganese to enhance overall strength corrosion resistance. This, combined with high ductility and toughness, makes it a popular grade for marine, architectural and industrial applications. Offers excellent resistance to stress corrosion, erosion, and biofouling in seawater and brackish water, excellent fabrication and welding properties, a high resistance to hydrogen embrittlement and the retention of mechanical properties down to cryogenic temperatures.

70-30 – 70/30 is a 70% copper, 30% nickel alloy with additions of iron and manganese. These elemental additions make it somewhat more resistant to corrosion and erosion and with slightly improved strength level than 90/10, making it suitable for more demanding applications. In particular, its corrosion resistance is notably improved in high-velocity waters (up to 4.5m/s) and polluted seawater. 70/30 is readily cold worked, fabricated and welded without any special material considerations.

COPPER BRASS Sheets , Plates , Coil, Shim Foil :
Brass Round Bars & SheetsCopper Brass Pipes
Copper & Brass Dealers in ChennaiCopper Brass Round Bars Virwadia Steels
Copper & Brass Plates Chennai IndiaCopper Brass Railway Pipes
Copper Brass Industrial pipesVirwadia Steels Copper Brass
Copper & Brass Round Bars in indiaCopper & Brass Sheets Chennai
Copper & Brass Round Bars in tamil NaduCopper & Brass Bars
Copper & Brass Perforated PlatesBrass Round Bars, Sheets, Pipes
Copper Pipes Brass Sheets Virwadia Copper Brass Chequered Sheets
Copper Brass CoilCopper & Brass Square
Copper & Brass TubesCopper & Pipes Brass Sheets
Copper & Brass Virwadia BrandCopper Brass Slitting Coil
Close Menu
error: Content is protected !!